A systematical study of the chiral magnetic effects at the RHIC and LHC energies

Considering the magnetic field response of the QGP medium,we perform a systematical study of the chiral magnetic effect(CME),and make a comparison with the experimental results for the background-subtracted correlator H at the energies of the RHIC Beam Energy Scan(BES)and the LHC energy.The CME signals from our computations show a centrality trend and beam energy dependence that are qualitatively consistent with the experimental measurements of the charge dependent correlations.The time evolution of the chiral electromagnetic current at the RHIC and LHC energies is systematically studied.The dependence of the time-integrated current signal on the beam energy√s with different centralities is investigated.Our phenomenological analysis shows that the time-integrated electromagnetic current is maximal near the collision energy√s≈39 GeV.The qualitative trend of the induced electromagnetic current is in agreement with the CME experimental results at the RHIC and LHC energies.     

Hydrodynamic and Thermodynamic Nonequilibrium Effects around Shock Waves: Based on a Discrete Boltzmann Method

A shock wave that is characterized by sharp physical gradients always draws the medium out of equilibrium. In this work, both hydrodynamic and thermodynamic nonequilibrium effects around the shock wave are investigated using a discrete Boltzmann model. Via Chapman–Enskog analysis, the local equilibrium and nonequilibrium velocity distribution functions in one-, two-, and three-dimensional velocity space are recovered across the shock wave. Besides, the absolute and relative deviation degrees are defined in order to describe the departure of the fluid system from the equilibrium state. The local and global nonequilibrium effects, nonorganized energy, and nonorganized energy flux are also investigated. Moreover, the impacts of the relaxation frequency, Mach number, thermal conductivity, viscosity, and the specific heat ratio on the nonequilibrium behaviours around shock waves are studied. This work is helpful for a deeper understanding of the fine structures of shock wave and nonequilibrium statistical mechanics.     

A micrometer head integrated microfluidic device for facile droplet size control and automatic measurement of a droplet size

A novel microfluidic droplet generator is proposed, which can control the droplet size through turning an integrated micrometer head with ease, and the size of the produced micro-droplet can be automatically and real-time monitored by an open-sourced software and off-the-shelf hardware.     

驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

Microwave‐assisted polycondensation of 4‐octylaniline with dibromoarylene

The Pd‐catalyzed polycondensation of 4‐octylaniline with various dibromoarylenes was carried out under microwave heating. Microwave heating led to a decrease in the reaction time and an increase in the molecular weight of the polymers as compared to conventional heating. Microwave heating also allowed the catalyst loading to be reduced to 1 mol %, yielding polymerization results that were comparable to those under conventional heating and 5 mol % catalyst. Investigations regarding field‐effect transistors and organic photovoltaic cells using the obtained poly(arylamine) with azobenzene units revealed that increasing the molecular weight of the polymer led to improved device performance, including hole mobility and power conversion efficiency. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 536–542     

Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Spreading of Oil Droplets Containing Surfactants and Pesticides on Water Surface Based on the Marangoni Effect

Oil droplets containing surfactants and pesticides are expected to spread on a water surface, under the Marangoni effect, depending on the surfactant. Pesticides are transported into water through this phenomenon. A high-speed video camera was used to measure the movement of Marangoni ridges. Gas chromatography with an electron capture detector was used to analyze the concentration of the pesticide in water at different times. Oil droplets containing the surfactant and pesticide spread quickly on the water surface by Marangoni flow, forming an oil film and promoting emulsification of the oil–water interface, which enabled even transport of the pesticide into water, where it was then absorbed by weeds. Surfactants can decrease the surface tension of the water subphase after deposition, thereby enhancing the Marangoni effect in pesticide-containing oil droplets. The time and labor required for applying pesticides in rice fields can be greatly reduced by using the Marangoni effect to transport pesticides to the target.     

Bi4Ge3O12:Er3+晶体中的高阶混合效应对EPR g因子的影响

通过对角化364×364完全能量矩阵的理论方法,对掺杂在Bi₄Ge₃O₁₂晶体中的Er³⁺的Stark能级和EPR参数进行了研究,同时,定量分析了高阶晶体场混合效应和J-J混合效应对EPR g因子的影响。研究结果表明:对Er³⁺来说,最主要的J-J混合效应来源于多重态谱项²K_15/2,其对EPR g因子的贡献约占2.5%,而最主要的高阶晶体场混合效应来源于第一激发多重态⁴I_13/2和基态多重态⁴I_15/2之间的晶体场混合,其对各向异性g因子中g_⊥的贡献大致是g_//的两倍(即g_⊥约占 0.21%,g_//约占0.092%),其他更高阶的晶体场混合和J-J混合效应可以忽略不计。因此,对于Er³⁺掺杂的络合物系统来说,只考虑基态多重态⁴I_15/2对EPR g因子的贡献应该是一个很好的近似。     

Spectrum–effect relationship of antioxidant and anti-inflammatory activities of Laportea bulbifera based on multivariate statistical analysis

Laportea bulbifera, named Hong He Ma in Chinese, is a Chinese herbal medicine commonly used by the Miao nationality of China. In this study, 43 batches of L. bulbifera were collected from different origins in China. Ethanol, ethyl acetate and petroleum ether were used to prepare different extracts of the plant. UHPLC technique was used to establish the fingerprints, whereas DPPH assay and RAW264.7 inflammatory cell models were used to evaluate the antioxidant and anti-inflammatory activities, respectively. Moreover, the spectrum–effect relationship between relative peak area of common peaks and efficacy value was set up by multivariate statistical analysis. Furthermore, 10 batches were selected randomly for validation of those models. The results showed that ethyl acetate and petroleum ether extracts possess excellent antioxidant and anti-inflammatory activities, respectively. Peaks A₆ and A₇ demonstrated the greatest antioxidant activity, while peak A₁₇ showed the strongest anti-inflammatory activity. After a verified experiment, the result was obtained and illustrated that the spectrum–effect relationship which we established could reliably infer antioxidant and anti-inflammatory compounds of the Chinese herbal medicine.     

Study of all stages of the Diels–Alder reaction of cyclopentadiene with 2,3-dicyano-1,4-benzoquinone and monoadducts: Kinetics,thermochemistry, and high pressure effect

The kinetic parameters and enthalpies of the Diels–Alder reactions between cyclopentadiene and 2,3-dicyano-1,4-benzoquinone leading to the formation of two different monoadducts and bisadduct were determined. The stability of adducts is compared. Monoadduct appears to be thermodynamically more stable than the bisadduct. Comparison with the other Diels–Alder reactions studied previously allows us to conclude that the heat effects upon formation of the considered Diels–Alder adducts are the lowest in comparison with all the studied dienophiles.